Implementation of Preventive Maintenance in Production Machine with Age Replacement Model in PT XYZ
Abstract
Reduce the amount of damage time injection molding machine during production, required preventive maintenance maintenance system with age replacement model. The result of data processing and analysis of critical injection molding machine problem is Toshiba 220 Ton with damage time 2,195 minutes during July to December 2016. Toshiba 220 Ton injection molding machine obtained four spare parts which are damaged is screw, oil seal, and nozzle and hydraulic, where the nozzle has a high frequency of damage. The replacement time according to the age replacement model for spare-part nozzle is 52 hours (3 working days) and inspection time four times a month. Increased reliability spare-part nozzle, equal to 0.4244 or 42.44% from the previous 0.35 to 0.50.
Full Text:
PDFReferences
Stephens, Matthew P., 2004, Productivity and Reliability-Based MaintenanceManagement, New Jersey: Pearson Education.
Corder, Anthony, 1992, Teknik Manajemen Pemeliharaan, Jakarta: Erlangga Ebeling, Charles E., 1997, Reliability and Maintanability Engineering, Singapura: McGraw Hill, 1997.
Assauri, Sofjan, 2008, Manajemen Produksi dan Operasi, Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia.
Jardine, AKS., 1995, Maintenance, Replacement & Reliability, Canada: Pittman Publishing Corporator.
Nasution. M. N, 2001, Manajemen Mutu Terpadu, Ghalia Indonesia, Jakarta.
Refbacks
- There are currently no refbacks.