ANALISA HEAD LOSS DAN KERJA POMPA DENGAN VARIASI PERUBAHAN DIAMETER PADA SISTEM PEMIPAAN

Agung Kurnia Yahya, Puji Rahayu, Hasnah Ulia, Achmad Yanuar Maulana

Abstract

Fluids often experience a loss of energy (head loss) in the pipe due to flow turbulence, which results in friction on the inner surface of the pipe. Head loss is very detrimental in piping systems because it can reduce the level of fluid flow efficiency. Head loss is affected by variations in bends (elbows), joints, valves, and pipe diameters. The purpose of this study is to determine the head loss that occurs in each line of the fluid flow piping system, which consists of variations in the cross-sectional area of the pipe and the number of connections, valves, and bends. In addition, it is also used to evaluate pump work in series and complex circuits. The smaller the diameter, the more the fluid velocity increases, causing the friction in the pipe to increase and the head loss to increase. The pump work required to flow the fluid is directly proportional to the amount of head loss that occurs in the piping system.

Keywords

Head Loss, Fluid Flow, Pipes, Pump Work

Full Text:

PDF

References

Anshori, L., & Adiwibowo, P. H. (2013). Eksperimental Karakteristik Pressure Drop Dengan Sambungan T ( Tee ). Jtm, 01(03), 65–73.

Fadhli, F., & Madjid, S. (2017). Studi Eksperimental Pengaruh Variasi Belokan Pipa (Elbow) Terhadap Kecepatan Aliran Fluida Dan Kerugian Tekanan. ILTEK : Jurnal Teknologi, 12(01), 1717–1721. https://doi.org/10.47398/iltek.v12i01.399

Fahruddin, A., & Mulyadi, M. (2018). Rancang Bangun Alat Uji Head Losses Dengan Variasi Debit Dan Jarak Elbow 90O Untuk Sistem Perpipaan Yang Efisien. Turbo : Jurnal Program Studi Teknik Mesin, 7(1), 32–35. https://doi.org/10.24127/trb.v7i1.680

Jalaluddin, J., Akmal, S., ZA, N., & Ishak, I. (2019). Analisa Profil Aliran Fluida Cair Dan Pressure Drop Pada Pipa L Menggunakan Metode Simulasi Computational Fluid Dynamic (Cfd). Jurnal Teknologi Kimia Unimal, 8(1), 97. https://doi.org/10.29103/jtku.v8i1.3396

Lesmana, P., Nuramal, A., & Suryadi, D. (2021). KARAKTERISTIK ALIRAN PADA POMPA YANG TERSUSUN SECARA SERI DAN PARALEL Flow Characteristics of Pumps in Series and Parallel. 5(2), 41–46.

Masyuda, F. A. (2018). Analisa Kerugian Head Losses Dan Friction Pada Sistem Perpipaan Beda Jenis Valve Dengan Variasi Bukaan Valve. 2(2), 4–21.

Salam, N. (2016). Pengaruh Potongan Pipa Pada Pipa Miter 90oTerhadap Kerugian Head Aliran Fluida. Jurnal Energi Dan Manufaktur, 8(2), 141–148.

Seminar, P., Nciet, N., & Conference, N. (2020). Kaji Eksperimental Head Loss Pada Gate Valve Dan Ball Valve. Prosiding Seminar Nasional NCIET, 1(1), 397–405. https://doi.org/10.32497/nciet.v1i1.144

Susilo, E. J., Dharma, U. S., & Irawan, D. (2021). Pengaruh viskositas bahan bakar terhadap karakteristik aliran fluida pada pompa sentrifugal. ARMATUR : Artikel Teknik Mesin & Manufaktur, 2(1), 27–32. https://doi.org/10.24127/armatur.v2i1.740

Widodo, E., & Pradhana, R. Y. (2018). Analysis of pipe diameter variation in axial pumps for reducing head loss. IOP Conference Series: Materials Science and Engineering, 403(1). https://doi.org/10.1088/1757-899X/403/1/012029

Yani, A., & Darmanto, A. (2021). Analisa Kerugian Head Akibat Perluasan Dan Penyempitan Penampang Pada Sambungan 90o. 1(1), 46–55.

DOI: http://dx.doi.org/10.52759/sainti.v19i2.184

Refbacks

  • There are currently no refbacks.