ANALISIS EFEKTIVITAS KINERJA RIPPLE MILL MENGGUNAKAN OVERALL EQUIPMENT EFFECTIVENESS: STUDI DI PALM OIL INDUSTRY SUMATERA UTARA

Putri Amelia, Rizki Fadhillah Lubis

Abstract

One of the factors that can affect the production process on the palm oil industry production floor is the decreasing effectiveness of the performance of production machines, including ripple mills. This study aims to analyze the effectiveness of ripple mill performance using Overall Equipment Effectiveness. This method uses three basic ratios: availability ratio, performance ratio, and quality ratio. The results of this study indicate that the Overall Equipment Effectiveness value obtained on the ripple mill machine in one of the palm oil industries in North Sumatra is still below 41.45% while the international OEE standard is 85%. The damage that is often encountered is a decrease in machine speed and rotor wear so that the rotor plate is blunt and causes ineffective breaking.

Keywords

Effectivity, Overall Equipment Effectiveness, Palm Oil Industry, Ripple Mill

Full Text:

PDF

References

Ananda, R., Hernawati, T., & Sibuea, S. R. (2022). Analisa Efektivitas Produksi Pada Stasiun Kernel Menggunakan Metode Overall Equipment Effectiveness Di Pt. Varem Sawit Cemerlang. Buletin Utama Teknik, 17(2), 157–162.

Candrianto, C., Sardani, R., Lubis, R. F., & Zakaria, M. (2021). Analisis Penyebab Kegagalan Mesin Wrapping Menggunakan Failure Mode And Effect Analysis di PT. X. INVENTORY: Industrial Vocational E-Journal On Agroindustry, 2(1), 33. https://doi.org/10.52759/inventory.v2i1.58

Fajrah, N., & Noviardi, N. (2018). Analisis Performansi Mesin Pre-Turning dengan Metode Overall Equipment Effectiveness pada PT APCB. Jurnal Optimasi Sistem Industri, 17(2), 126–134. https://doi.org/10.25077/josi.v17.n2.p126-134.2018

Hikmawan, O., Naufa, M., & Indriani, B. M. (2021). Pengaruh Jarak Rotor Terhadap Efisiensi Pemecahan Biji Pada Stasiun Ripple Mill Di Pabrik Kelapa Sawit. Jurnal Teknik Dan Teknologi, 16(31), 14–21.

Lesmana, A. (2021). Analisis Hasil Kinerja Mesin Ripple Mill Di Stasiun Pengolahan Biji Pabrik Kelapa Sawit. In Fakultas Teknik, Universitas Medan Area. Universitas Medan Area.

Muhsin, A. (2016). Analisis Performansi Departemen Machinning Menggunakan Metode Overall Equipment Effectivenes (Oee). Jurnal OPSI (Optimasi Sistem Industri), 9(1), 16–23.

Prastyo, H. A. (2017). Uji Kinerja Alat Pemecah Benih Kelapa Sawit. Jurnal Teknik Pertanian Lampung, 6(2), 115–124.

Rahayu, A. (2014). Evaluasi Efektivitas Mesin Kiln Dengan Penerapan Total Productive Maintenance Pada Pabrik II/III PT Semen Padang. Jurnal Optimasi Sistem Industri, 13(1), 454–485.

Rizkia, Irma. 2015. Penerapan Metode Overall Equipment Effectiveness (OEE) dan Failure Mode and Effect Analysis (FMEA) dalam Mengukur Kinerja Mesin Produksi Winding NT-880N untuk Meminimasi Six Big Losses. Bandung: Itenas

Siregar, K., & Rizkiansyah, H. (2022). Analisis Efektivitas Mesin Ripple Mill Menggunakan Metode Overall Equipment Effectiveness (OEE). 5(2), 0–7. https://doi.org/10.32734/ee.v5i2.1556

Stamatis, D. H. (2011). The OEE Primer (1st ed.). Productivity Press. https://doi.org/10.1201/EBK1439814062

Viarani, S. O., Lubis, R. F., Jumita, S., & Siregar, R. S. (2022). Analysis of Crude Palm Oil Quality Using Statistical Quality Control in the Palm Oil Industry. JASc (Journal of Agribusiness Sciences), 05(02), 84–97. https://doi.org/10.30596/jasc.v6i2.10116

DOI: http://dx.doi.org/10.52759/sainti.v19i1.288

Refbacks

  • There are currently no refbacks.